Description
The perfect light curing device for beginners!
Whether at home or on the go, this particularly handy UV/LED lamp is a must-have. Equipped with 18 optimally positioned, powerful LEDs, it reliably ensures fast curing of your gel polish or gel.
The automatic start with light barrier and the convenient timer levels allow you to work comfortably.
- handy UV/LED light curing device
- reliable & even curing
- Time-saving; LED-compatible products such as gel polish cure within 60 seconds
- Space-saving – particularly compact design
- Automatic start (light barrier)
- 4 different timer levels
- Digital display
- Also suitable for pedicures
Technical data:
- UV/LED light curing device
- Max. power consumption: 14W
- Number of LED lights: 18 optimally placed high-performance LEDs
- Input voltage range: 100-240 V, 50-60 Hz
- Output voltage: DC24V
- Device size: 197 x 126 x 68 mm
A little tip: For particularly highly pigmented shades and sealing gels, the usual curing time may vary slightly.
Warning: 1. Read the instruction manual carefully and keep it for a safe place. 2. Only operate the device with the supplied power adapter and the specified mains voltage. 3. Protect the device from moisture, heat, flames, extreme cold and direct sunlight. 4. Keep the inside of the device free of gel varnish and gel residue as far as possible. 5. Only clean the surface of the device with a damp cloth. Make sure the device is not connected to the power supply. 6. Unplug the device from the power supply when not in use. 7. Do not let the device run continuously for more than 600 seconds, as this could reduce the lifespan of your device. 8. Avoid looking directly into the light source.
| Brand | Juliana Nails |
|---|---|
| Product Type | UV/LED Lichthärtungsgerät |
Usage Information
1.Attach the power adapter to the connection point of the device and connect it to the power supply.
2.As soon as the device has access to the power supply, the light on the display will light up.
3.By pressing a time selection button (30s, 60s or 90s) you start the desired running time of your light curing device.
4. If you remove your hand from the device before the timer runs out, the device will pause. As soon as you place your hand back in the device, the timer will resume.
5.By pressing the same time selection button again, the timer program can be stopped early.
6. Another option is to use the device with just the light barrier (without timer buttons). The infrared sensor automatically activates/deactivates the device's light by placing or removing your hand (99s mode).
7. The lamp's continuous function is activated by pressing the 60s timer button for 5 seconds. The number 88 will now appear constantly on the display. To deactivate this function, briefly unplug the lamp.
Small tip: For particularly highly pigmented shades and sealing gels, the usual curing time may vary slightly
Customers Also Bought
MSRP €17.95
€13.46
Questions to the product
No questions available yet.
